Hello, first of all I want to thank you for this amazing API.

When I download and burn the hex file of PACMAN, it works fine on my atmega168 @20Mhz. (By the way, I connected it to my PAL tv throug scart , fist it showed a black screen, then I schanged the pull-up resistor from 1K to 330 Ohm and it worked fine)

But, when I compile the PACMAN source files without changing anything, it shows garbage on the screen. I am using the latest winavr version i.e. winavr-20100110.

Any suggestions?

synch output ib PB0 not PB1, and changed the CPU freq in video.h file, now it works, but it is flickering a litte.

Hey Jerry, will you share the source code of pacman.hex file for Atmega168 board?

You did an amazing job by the way, thanks a lot.

The pacman project is the original version from Albert Seward, it is using its own driver, not AVGA. I don't have access to the modified source code right now. I'll add it to the site as soon as possible. Meanwhile, you can try to compile the project with AVGA (remove mode0.s and video.c and add the avga dir). It might require slight modification of source for the game, but it should work.